- Introduction to BOC Healthcare
- Our Home Oxygen Service
- Newly Diagnosed
- Our Home Oxygen Equipment
- Travelling with oxygen
- Safety Information
- Placing an order
- Reporting an Issue
- Advice and Support
Step 1: Insert the plug into the wall socket which was tested when we first installed your concentrator.
Step 2: Attach the tubing from the cannula to the outlet connection of the concentrator.
Step 3: Press the on/off switch on the front panel of the unit once. The alarm will sound for a few seconds and then stop.
Step 4: On installation the Patient Service Representative (PSR) will set the concentrator to the prescribed flowrate.
If you suspect there is no flow at all, this can be tested by placing the end of the tubing in a glass of water and watching for bubbles. If a flow is not evident, contact the Patient Service Centre 0800 136 603.