Before you start:
Using a clean and dry cloth, wipe the male fill connector on the mother unit and the female fill connector on the portable flask.
Step 1. Position the portable flask over the recessed area on the top of the mother unit, carefully lower the flask into place so that the fill connectors are properly aligned.
Step 2.Place one or both hands on top of the portable flask and press straight down directly over the fill connector, pull down and hold the vent valve lever in the open position, as shown.
Step 3. When the portable flask is full there will be a change in the sound. Close the vent valve by returning the vent lever to the upright position.
Disengage the portable flask from the mother unit vessel by pressing the portable release button and lifting the portable flask off the reservoir, as shown.
Check the content of the
portable flask by lifting the contents indicated strap, ensuring the bottom back of the unit is straight. The green bar inside the clear window indicates how full the unit is. (If you have another type of flask please call our Patient Service Centre).