- Introduction to BOC Healthcare
- Our Home Oxygen Service
- Newly Diagnosed
- Our Home Oxygen Equipment
- Travelling with oxygen
- Safety Information
- Placing an order
- Reporting an Issue
- Advice and Support
Step 1: Check you have the correct Regulator which will supply you/the patient the prescribed flow rate.
Step 2: Ensure you have the correct medical gas cylinder and ensure the flow selector on the top of the cylinder is set to zero.
Step 3: Insert the Regulator directly into the shrader value until it clicks. Attach the tubing to the Regulator.
Step 4: Set the Regulator to the prescribed flow rate by rotating the dial selector.
Step 5: Slowly turn on the cylinder by rotating the handwheel anticlockwise until it comes to a complete stop.
Step 6: If you need to remove the Regulator push and turn anti clockwise and repeat steps 1-5.